PT EN ES

PRODUCTS

  • Schadek Code
  • Others Codes

Download the App and access the Schadek catalog every time you need it!

WATER PUMPS

It is responsible for the circulation of the cooling fluid through channels in the engine block. While flowing through the channels, the coolant removes the heat and transports it to the radiator where the fluid is cooled prior to returning to the system.

PUMP
REPAIR KITS

Our differentials

  • High-capacity seal.

  • High-quality resistant bearings.

  • Meet compliance standards of original equipment.

Recommendations

  • Clean the seating surfaces on the block and the pump. Never use cotton waste, it can release lint that can obstruct the water flow.

  • Before replacing the pump, check the state of the fan and of the belt.

  • Never use glue, adhesives or silicone to improve the sealing, it is unnecessary and dangerous. The seal and/or seal ring are sufficient.

OIL PUMPS

It is responsible for the circulation of the lubricant fluid through the engine. By circulating the lubricant oil between the moving parts of the engine, the fluid reduces friction, thereby minimizing heat, and removing impurities generated during the operation of the engine.

Our differentials

  • Market leader quality and reliability.

  • The best performance for each application.

  • Superior durability.

Recommendations

  • Only remove the pump from the packaging when it's time to install it, thereby preventing the entrance of any type of impurities.

  • Place the oil in the pump and in the filter before installing it. Never allow it operate while empty.

FUEL PUMPS

Also called low pressure pump, it is intended to pump fuel up to the high pressure pump, or directly into the fuel injection units.

Our differentials

  • High performance for electronic engines.

Recommendations

  • Clean the fuel tank and replace filters, hose and clamps every time you replace the fuel pump.

  • Like with the oil pump, only remove the product from the packaging when it's time to install it in the engine.

SUCTION TUBES

Suction tubes are responsible for suctioning lubricants from the oil pan and sending them to the oil pump.

Our differentials

  • Schadek manufacturing quality.

Recommendations

  • To the improve the operation of the suction tube, never remove the protective screen. It avoids the entrance of dust particles in the oil pump and in the engine itself.

  • Replace the suction tube whenever you replace the oil pumps.

RELIEF VALVES

They regulate the pressure and flow in the lubrication system.

Our differentials

  • High resistance and durability.

Recommendations

  • During maintenance of the lubrication systems, always replace the relief valves. If it is in a poor state-of-repair, it could interfere directly in the operation of the system.